Nowadays, egg-washing machines are increasingly widely used in the poultry industry and other sectors. The use of egg-washing machines not only disinfects and sterilises eggs but also improves efficiency and saves on labour costs. People use egg-washing machines precisely to improve efficiency; however, after a period of use, it is inevitable that some problems will arise, preventing the machine from functioning normally. Let us now take a look at some common faults with egg-washing machines and how to repair them. 1. During operation, the bearings of the egg washer may produce a distinct rattling noise or show signs of severe wear. In the former case, this can be resolved by applying unsalted butter to lubricate the bearings; in the latter case, the bearings must be replaced.

2. If the drive chain on the egg-washing machine skips teeth or is too loose, this will affect operation. If the sprocket is severely damaged, it must be replaced immediately; if the chain is too loose, it can be tightened slightly.
3. The egg washer is prone to high wear and tear. Should this occur, inspect the tips of the brushes on the egg-loading rack to check for severe damage. If the brushes are causing issues, replace them immediately or adjust their spacing to prevent significant losses.
The three points mentioned above cover the most common faults with egg washers. You may wish to use this as a reference for your own situation; it may prove helpful.